Juniper JN0-363 Exam Dumps Options To Pass the Exam 2023

Jonnie Karnath2023-04-06T20:42:46+00:00

Juniper JN0-363 exam dumps are an excellent tool for anyone preparing for the Service Provider Routing and Switching, Specialist (JNCIS-SP) exam. It covers all the topics and concepts that you need to know to pass the exam. They are designed by industry experts who have in-depth knowledge of the subject matter and can provide you with the most relevant and accurate information. Using Juniper JN0-363 exam dumps will give you a realistic exam experience, as the questions are similar in format and difficulty to the actual exam questions. This will help you prepare better for the exam and reduce exam anxiety. It will also helps you identify your strengths and weaknesses and focus your study efforts accordingly.

Page 1 of 2

1. Which two statements ate correct about the community BGP attribute on a Junos device? (Choose two.)

The community attribute is a mandatory BGP attribute.

If the community attribute is present, it is ignored and deleted in the BGP updates.

If the community attribute is present, it should be passed unchanged in the BGP updates.

The community attribute is an optional BGP attribute.

2. You are asked to configure an LSP which uses the OSPF link state database for path computations .

Which two statements are correct in this scenario? (Choose two.)

You must use the no-cspf parameter in the label-switched-path configuration.

Traffic engineering extensions ate enabled by default In OSP

Traffic engineering extensions are not enabled by default in OSP

You must use the policing parameter in the label-switched-path configuration.

3. Exhibit

Referring to the exhibit, which statement is true about VRRP?

VRRP communication between the two devices is not functioning correctly.

Both routers are in the same state because they have the same VRRP priority.

RRP Is functioning normally in active/active mode.

The routers should use different virtual IP addresses for VRRP to function correctly.

4. The segment touting SRGB start label Is 10,000 and the SRGB index range is 500.

In this scenario, which two statements are correct? (Choose two.)

The first usable label is 10,00 1.

The last usable label is 10.50 1.

The last usable label is 10,499.

The first usable label Is 10,000.

5. You are bringing a new network online with three MX Series devices enabled for STP. No root bridge priority has been configured .

Which statement is true in this scenario?

The device with the lowest MAC address will be elected as the root bridge.

The device with the highest MAC address will be elected as the root bridge.

The device with the lowest numerical lo0 IP address will be elected as the root bridge.

The device with the highest numerical lo0 IP address will be elected as The bridge.

6. Which two statements are correct about IS-IS? (Choose two.)

A level 1 only router can never form an adjacency with a level 2 only router.

For level 2 adjacencies, the area IDs can be different.

For level 2 adjacencies, the area IDs must be the same.

A level 1 only router can form an adjacency with a level 2 only router.

7. Which statement is correct about the FE80;:/10 prefix?

This prefix range is used for the link local address.

This prefix range is used on the loopback interface.

This prefix range is reserved for multicast applications

This prefix range is not reserved.

8. What are three types of MPLS routers? (Choose three.)

transit routers

peering routers

egress routers

aggregation routers

ingress routers

9. Exhibit

Referring to the exhibit, which two statements are correct? (Choose two.)

The OSPF Interfaces are configured as point-to-point.

The ge-0/0' 1. 0 Interface is configured as passive.

The R2 device is an AB

Junos OS default OSPF hello timers and dead intervals are used on all interfaces.

10. Exhibit

Referring to the exhibit, what will happen to untagged frames?

The untagged frames are dropped.

The untagged frames are load balanced between VLAN 10 and VLAN 20.

The untagged frames are associated with VLAN 10.

The untagged frames are associated with VLAN 20.

Page 2 of 2

11. Exhibit

You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis adjacency command as shown in the exhibit.

What is the problem in this scenario?

This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.

The family iso statement must be added to the logical interface.

The router at the other end of the link Is not sending any IS-IS Hello messages.

The router at the other end of the link is a Level 1 only router.

12. Exhibit

Referring to the exhibit, which two statements are correct? (Choose two.)

Prefixes in Level 1 will be redistributed to Level 2.

Prefixes In Level 2 will be not redistributed to Level 1.

Prefixes in Level 2 will be redistributed to Level 1.

Prefixes in Level 1 will not be redistributed to Level 2.

13. Exhibit

Routers R1 and R4 have a VRRP priority of 90, while R2 and R3 have default VRRP priorities

Referring to the exhibit, which router will be elected as the primary VRRP router?

14. Which two statements are correct about the way that BGP propagates routes by default? (Choose two.)

A route learned by EBGP will be re-advertised to IBGP peers.

A route learned by IBGP will not be re-advertised lo IBGP peers.

A route learned by EBGP will not be re-advertised to IBGP peers.

A route learned by IBGP will be re-advertised to IBGP peers.

15. You are deploying link aggregation groups.

By default, what are two considerations in this scenario? (Choose two.)

There should only be four member links per LA

All the ports must have the same speed.

Member links are required to be contiguous ports.

Member links can reside on different members within an MC-LA

16. Which two LSA types are permuted in OSPF totally stubby areas? (Choose two.)

Type 1

Type 3

Type 5

Type 7

17. Exhibit

You are asked to configure the OSPF environment to prevent the DRother routers from participating in DR/BDR election.

Referring to the exhibit, which command will accomplish this task?

set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255

set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority 0

set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma

set protocols ospf area 0.0.0.0 interface ge―0/0/1 interface-type p2p

Facebook Twitter LinkedIn Google + Email