Juniper JN0-636 Exam Questions - Best Way Towards Success

Juniper JN0-636 Exam Questions – Best Way Towards Success

Jonnie Karnath2023-04-23T19:32:53+00:00

Practicing with Juniper JN0-636 exam questions is an essential part of preparing for the Security,Professional (JNCIP-SEC) exam, and can greatly increase the chances of success. To maximize your chances of success on the JN0-636 exam, it’s essential to focus on your weak areas and practice extensively. By practicing with Juniper JN0-636 exam questions, candidates can also identify areas where they need to improve their knowledge, and focus their studying efforts accordingly. Additionally, by answering these questions under timed conditions, candidates can simulate the exam environment and become more comfortable with the format and pacing of the actual exam.

Page 1 of 3

1. Exhibit

Referring to the exhibit, which statement is true?

This custom block list feed will be used before the Juniper Seclntel

This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.

This custom block list feed will be used instead of the Juniper Seclntel block list feed

This custom block list feed will be used after the Juniper Seclntel block list feed.

2. Which two modes are supported on Juniper ATP Cloud? (Choose two.)

global mode

transparent mode

private mode

Layer 3 mode

3. You are required to deploy a security policy on an SRX Series device that blocks all known Tor network IP addresses.

Which two steps will fulfill this requirement? (Choose two.)

Enroll the devices with Juniper ATP Appliance.

Enroll the devices with Juniper ATP Cloud.

Enable a third-party Tor feed.

Create a custom feed containing all current known MAC addresses.

4. Which method does an SRX Series device in transparent mode use to learn about unknown devices in a network?

LLDP-MED

IGMP snooping

RSTP

packet flooding

5. Exhibit

Referring to the exhibit, which two statements are true? (Choose two.)

The data that traverses the ge-0/070 interface is secured by a secure association key.

The data that traverses the ge-070/0 interface can be intercepted and read by anyone.

The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.

The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.

6. You are asked to determine if the 203.0.113.5 IP address has been added to the third-party security feed, DS hield, from Juniper Seclnte1. You have an SRX Series device that is using Seclnte1 feeds from Juniper ATP Cloud

Which command will return this information?

show security dynamic―address category―name CC | match 203.0.113.5

show security dynamic―address category―name Infected―Hosts | match 203.0.113.5

show security dynamic-address category-name IP Filter I match 203.0.113.5

show Security dynamic-address category-name JWAS | match 203.0.113.5

7. Exhibit.

A hub member of an ADVPN is not functioning correctly.

Referring the exhibit, which action should you take to solve the problem?

[edit interfaces] root@vSRX-1# delete st0.0 multipoint

[edit interfaces] user@hub-1# delete ipsec vpn advpn-vpn traffic-selector

[edit security] user@hub-1# set ike gateway advpn-gateway advpn suggester disable

[edit security] user@hub-1# delete ike gateway advpn-gateway advpn partner

8. Exhibit

Which two statements are correct about the output shown in the exhibit. (Choose two.)

The source address is translated.

The packet is an SSH packet

The packet matches a user-configured policy

The destination address is translated.

9. You opened a support ticket with JTAC for your Juniper ATP appliance. JTAC asks you to set up access to the device using the reverse SSH connection.

Which three setting must be configured to satisfy this request? (Choose three.)

Enable JTAC remote access

Create a temporary root account.

Enable a JATP support account.

Create a temporary admin account.

Enable remote support.

10. Exhibit

You configure Source NAT using a pool of addresses that are in the same subnet range as the external ge-0/0/0 interface on your vSRX device. Traffic that is exiting the internal network can reach external destinations, but the return traffic is being dropped by the service provider router.

Referring to the exhibit, what must be enabled on the vSRX device to solve this problem?

STUN

Proxy ARP

Persistent NAT

DNS Doctoring

Page 2 of 3

11. You are asked to configure a security policy on the SRX Series device. After committing the policy, you receive the “Policy is out of sync between RE and PFE <SPU-name(s)>.” error.

Which command would be used to solve the problem?

request security polices resync

request service-deployment

request security polices check

restart security-intelligence

12. Exhibit

Referring to the exhibit, which three protocols will be allowed on the ge-0/0/5.0 interface? (Choose three.)

IBGP

OSPF

IPsec

DHCP

NTP

13. Click the Exhibit button.

When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit.

What is the cause of the error?

The fxp0 IP address is not routable

The SRX Series device certificate does not match the JATP certificate

The SRX Series device does not have an IP address assigned to the interface that accesses JATP

A firewall is blocking HTTPS on fxp0

14. You are asked to allocate security profile resources to the interconnect logical system for it to work properly.

In this scenario, which statement is correct?

The NAT resources must be defined in the security profile for the interconnect logical system.

No resources are needed to be allocated to the interconnect logical system.

The resources must be calculated based on the amount of traffic that will flow between the logical systems.

The flow-session resource must be defined in the security profile for the interconnect logical system.

15. Your IPsec VPN configuration uses two CoS forwarding classes to separate voice and data traffic.

How many IKE security associations are required between the IPsec peers in this scenario?

16. You are asked to look at a configuration that is designed to take all traffic with a specific source ip address and forward the traffic to a traffic analysis server for further evaluation. The configuration is no longer working as intended.

Referring to the exhibit which change must be made to correct the configuration?

Apply the filter as in input filter on interface xe-0/2/1.0

Apply the filter as in input filter on interface xe-0/0/1.0

Create a routing instance named default

Apply the filter as in output filter on interface xe-0/1/0.0

17. Exhibit

You are asked to establish an IBGP peering between the SRX Series device and the router, but the session is not being established. In the security flow trace on the SRX device, packet drops are observed as shown in the exhibit.

What is the correct action to solve the problem on the SRX device?

Create a firewall filter to accept the BGP traffic

Configure destination NAT for BGP traffic.

Add BGP to the Allowed host-inbound-traffic for the interface

Modify the security policy to allow the BGP traffic.

18. To analyze and detect malware, Juniper ATP Cloud performs which two functions? (Choose two.)

cache lookup: to see if the file is seen already and known to be malicious

antivirus scan: with a single vendor solution to see if the file contains any potential threats

dynamic analysis: to see what happens if you execute the file in a real environment

static analysis: to see what happens if you execute the file in a real environment

19. Exhibit

Your company recently acquired a competitor. You want to use using the same IPv4 address space as your company.

Referring to the exhibit, which two actions solve this problem? (Choose two)

Configure static NAT on the SRX Series devices.

Connect the competitor network using IPsec policy-based VPNs.

Identify two neutral IPv4 address spaces for address translation.

Configure IPsec Transport mode.

20. Click the Exhibit button.

Which type of NAT is shown in the exhibit?

NAT46

NAT64

persistent NAT

DS-Lite

Page 3 of 3

21. You are asked to download and install the IPS signature database to a device operating in chassis cluster mode.

Which statement is correct in this scenario?

You must download and install the IPS signature package on the primary node.

The first synchronization of the backup node and the primary node must be performed manually.

The first time you synchronize the IPS signature package from the primary node to the backup node, the primary node must be rebooted.

The IPS signature package must be downloaded and installed on the primary and backup nodes.

22. You are asked to deploy filter-based forwarding on your SRX Series device for incoming traffic sourced from the 10.10 100 0/24 network in this scenario, which three statements are correct? (Choose three.)

You must create a forwarding-type routing instance.

You must create and apply a firewall filter that matches on the source address 10.10.100.0/24 and then sends this traffic to your routing

You must create and apply a firewall filter that matches on the destination address 10 10.100.0/24 and then sends this traffic to your routing instance.

You must create a RIB group that adds interface routes to your routing instance.

You must create a VRF-type routing instance.

23. Which two statements are correct regarding tenant systems on SRX Series devices? (Choose two.)

A maximum of 32 tenant systems can be configured on a physical SRX device.

All tenant systems share a single routing protocol process.

Each tenant system runs its own instance of the routing protocol process

A maximum of 500 tenant systems can be configured on a physical SRX device.

24. Which two types of source NAT translations are supported in this scenario? (Choose two.)

translation of IPv4 hosts to IPv6 hosts with or without port address translation

translation of one IPv4 subnet to one IPv6 subnet with port address translation

translation of one IPv6 subnet to another IPv6 subnet without port address translation

translation of one IPv6 subnet to another IPv6 subnet with port address translation

25. You are requested to enroll an SRX Series device with Juniper ATP Cloud.

Which statement is correct in this scenario?

If a device is already enrolled in a realm and you enroll it in a new realm, the device data or configuration information is propagated to the new realm.

The only way to enroll an SRX Series device is to interact with the Juniper ATP Cloud Web portal.

When the license expires, the SRX Series device is disenrolled from Juniper ATP Cloud without a grace period

Juniper ATP Cloud uses a Junos OS op script to help you configure your SRX Series device to connect to the Juniper ATP Cloud service.

26. The monitor traffic interface command is being used to capture the packets destined to and the from the SRX Series device.

In this scenario, which two statements related to the feature are true? (Choose two.)

This feature does not capture transit traffic.

This feature captures ICMP traffic to and from the SRX Series device.

This feature is supported on high-end SRX Series devices only.

This feature is supported on both branch and high-end SRX Series devices.

27. Regarding IPsec CoS-based VPNs, what is the number of IPsec SAs associated with a peer based upon?

The number of traffic selectors configured for the VP

The number of CoS queues configured for the VP

The number of classifiers configured for the VP

The number of forwarding classes configured for the VP

28. Exhibit.

Referring to the exhibit, which two statements are true? (Choose two.)

The configured solution allows IPv6 to IPv4 translation.

The configured solution allows IPv4 to IPv6 translation.

The IPv6 address is invalid.

External hosts cannot initiate contact.

Facebook Twitter LinkedIn Google + Email