Juniper JN0-664 Exam Dumps For Brilliant Exam Study 2023

Jonnie Karnath2023-05-12T17:21:40+00:00

If you’re preparing for the Service Provider Professional (JNCIP-SP) exam, then Juniper JN0-664 exam dumps are an excellent resource to help you pass with ease. These questions are designed to align with the latest exam syllabus and pattern, ensuring that you receive the most up-to-date information possible. One of the most significant advantages of Juniper JN0-664 exam dumps is their ability to provide regular updates to reflect the latest changes in the exam. This ensures that you have access to the most recent information and are fully prepared for the exam.

Page 1 of 2

1. Exhibit

Referring to the exhibit, which statement is correct?

The vrf-target configuration will allow routes to be shared between CE-1 and CE-2.

The vrf-target configuration will stop routes from being shared between CE-1 and CE-2.

The route-distinguisher configuration will allow overlapping routes to be shared between CE-1 and CE-2.

The route-diatinguisher configuration will stop routes from being shared between CE-1 and CE-2.

2. Which statement is correct about IS-IS when it performs the Dijkstra algorithm?

The local router moves its own local tuples into the candidate database

When a new neighbor ID in the tree database matches a router ID in the LSDB, the neighbor ID is moved to the candidate database

Tuples with the lowest cost are moved from the tree database to the LSD

The algorithm will stop processing once the tree database is empty.

3. Exhibit

Referring to the exhibit, CE-1 is providing NAT services for the hosts at Site 1 and you must provide Internet access for those hosts

Which two statements are correct in this scenario? (Choose two.)

You must configure a static route in the main routing instance for the 10 1 2.0/24 prefix that uses the VPN-

inet.0 table as the next hop

You must configure a static route in the main routing instance for the 203.0.113.1/32 prefix that uses the VPN-

inet.0 table as the next hop.

You must configure a RIB group on PE-1 to leak a default route from the inet.0 table to the VPN-

inet.0 table.

You must configure a RIB group on PE-1 to leak the 10 1 2.0/24 prefix from the VPN-

inet.0 table to the inet.0 table.

4. 1.Which two statements are correct about reflecting inet-vpn unicast prefixes in BGP route reflection? (Choose two.)

Route reflectors do not change any existing BGP attributes by default when advertising routes.

A BGP peer does not require any configuration changes to become a route reflector client.

Clients add their originator ID when advertising routes to their route reflector

Route reflectors add their cluster ID to the AS path when readvertising client routes.

5. Which two statements are correct about a sham link? (Choose two.)

It creates an OSPF multihop neighborship between two PE routers.

It creates a BGP multihop neighborship between two PE routers.

The PEs exchange Type 1 OSPF LSAs instead of Type 3 OSPF LSAs for the L3VPN routes

The PEs exchange Type 3 OSPF LSAs instead of Type 1 OSPF LSAs for the L3VPN routes.

6. Which two statements are correct regarding bootstrap messages that are forwarded within a PIM sparse mode domain? (Choose two.)

Bootstrap messages are forwarded only to routers that explicitly requested the messages within the PIM sparse-mode domain

Bootstrap messages distribute RP information dynamically during an RP election.

Bootstrap messages are used to notify which router is the PIM RP

Bootstrap messages are forwarded to all routers within a PIM sparse-mode domain.

7. Exhibit.

Referring to the exhibit; the 10.0.0.0/24 EBGP route is received on R5; however, the route is being hidden.

What are two solutions that will solve this problem? (Choose two.)

On R4, create a policy to change the BGP next hop to itself and apply it to IBGP as an export policy

Add the external interface prefix to the IGP routing tables

Add the internal interface prefix to the BGP routing tables.

On R4, create a policy to change the BGP next hop to 172.16.1.1 and apply it to IBGP as an export policy

8. Which two statements are correct about the customer interface in an LDP-signaled pseudo wire? (Choose two)

When the encapsulation is vlan-ccc or extended-vlan-ccc, the configured VLAN tag is not included in the control plane LDP advertisement

When the encapsulation is ethernet-ccc, only frames without a VLAN tag are accepted in the data plane

When the encapsulation is vLan-ccc or extended-vlan-ccc, the configured VLAN tag is included in the control plane LDP advertisement

When the encapsulation is ethemet-ccc, tagged and untagged frames are both accepted in the data plane.

9. Exhibit

Referring to the exhibit, which two statements are true? (Choose two.)

This route is learned through EBGP

This is an EVPN Type-2 route.

The device advertising this route into EVPN is 192.168.101.5.

The devices advertising this route into EVPN are 10 0 2 12 and 10.0.2.22.

10. Exhibit

You want to use both links between R1 and R2 Because of the bandwidth difference between the two links, you must ensure that the links are used as much as possible.

Which action will accomplish this goal?

Define a policy to tag routes with the appropriate bandwidth community.

Disable multipath.

Ensure that the metric-out parameter on the Gigabit Ethernet interface is higher than the 10 Gigibit Ethernet interface.

Enable per-prefix load balancing.

Page 2 of 2

11. Which two statements are correct about IS-IS interfaces? (Choose two.)

If a broadcast interface is in both L1 and L2, one combined hello message is sent for both levels.

If a point-to-point interface is in both L1 and L2, separate hello messages are sent for each level.

If a point-to-point interface is in both L1 and L2, one combined hello message is sent for both levels.

If a broadcast interface is in both L1 and L2, separate hello messages are sent for each level

12. Exhibit

The network shown in the exhibit is based on IS-IS

Which statement is correct in this scenario?

The NSEL byte for Area 0001 is 00.

The area address is two bytes.

The routers are using unnumbered interfaces

The system IDofR1_2 is 192.168.16.1

13. Exhibit

Referring to the exhibit, which three statements are correct about route 10 0 0.0/16 when using the default BGP advertisement rules'? (Choose three.)

R1 will prepend AS 65531 when advertising 10 0.0 0/16 to R2.

R1 will advertise 10.0.0.0/16 to R2 with 192 168 1 1 as the next hop.

R2 will advertise 10.0.0.0/16 to R3 with 192.168.1 1 as the next hop

R4 will advertise 10 0.0 0/16 to R6 with 172.16 1 1 as the next hop

R2 will advertise 10.0.0.0/16 to R4 with 172.16.1.1 as the next hop

14. Which three mechanisms are used by Junos platforms to evaluate incoming traffic for CoS purposes? (Choose three )

rewrite rules

behavior aggregate classifiers

traffic shapers

fixed classifiers

multifield classifiers

15. Exhibit

A network is using IS-IS for routing.

In this scenario, why are there two TLVs shown in the exhibit?

There are both narrow and wide metric devices in the topology

The interface specified a metric of 100 for L2.

Wide metrics have specifically been requested

Both IPv4 and IPv6 are being used in the topology

16. Exhibit

A network designer would like to create a summary route as shown in the exhibit, but the configuration is not working.

Which three configuration changes will create a summary route? (Choose three.)

set policy-options policy-statement leak-v6 term DC-routes then reject

delete policy-options policy-statement leak-v6 term DC-routes from route-filter 2001: db9:a: fa00 : :/6l longer

set policy―options policy-statement leak-v term DC―routes from route-filter 2001:db9:a:faOO::/61 exact

delete protocols isis export summary-v6

set protocols isis import summary-v6

17. Exhibit

Based on the configuration contents shown in the exhibit, which statement is true?

Joins for group 224.7.7.7 are rejected if the source address is 192.168.100.10

Joins for any group are accepted if the group count value is less than 25.

Joins for group 224.7.7.7 are always rejected, regardless of the group count.

Joins for group 224.7.7.7 are accepted if the group count is less than 25

18. Which origin code is preferred by BGP?

Internal

External

Incomplete

Null

Facebook Twitter LinkedIn Google + Email