Using HPE OneView HPE2-T37 Dumps Questions [2023] Update

Jonnie Karnath2023-05-29T06:37:09+00:00

Certspots is pleased to announce the release of its HPE2-T37 dumps questions for HPE OneView certification exam preparation. The HPE OneView certification is designed to validate the skills and knowledge of IT professionals who want to manage HPE products and solutions.The Using HPE OneView HPE2-T37 dumps questions from Certspots are created by a team of experts, who have years of experience in the IT industry. These dumps cover all the topics that are essential for passing the HPE OneView certification exam. The questions are updated regularly to ensure that they are in line with the latest exam pattern and syllabus. If you want to pass the HPE OneView certification exam in the first attempt, Certspots Using HPE OneView HPE2-T37 dumps questions are the right choice. Get your hands on these dumps today and take the first step towards a successful IT career.

Page 1 of 3

1. Which types of support dump can be created using HPE OneView? (Select two.)

Enclosure group support dump

Appliance support dump

Firmware deployment support dump

Logical enclosure support dump

Maintenance console support dump

2. DRAG DROP

For each feature. indicate whether it is available with both hpeoneview Standard and hpeoneview Advanced licenses, or only with an hpeoneview Advanced license.

3. You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.

What can be done to fix this issue?

The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.

The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.

Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.

Ensure that the Link Aggregation Group time-out value matches the server set values.

4. Within HPE OneView you can configure SNMPv1 read community string.

What is the purpose of this feature?

This is an SNMP community string that will be used when traps are forwarded to a WBEM Provider

This is an SNMP community string that will be used when traps are forwarded to other SNMP applications

This is an SNMP community string that will be used to receive a trap's SNMP Agent

This is an SNMP community string that will be used to receive traps from HPE Onboard Administrators

5. You want to put two FlexNlCs into a single Link Aggregation Group within a server profile .

What Is a prerequisite for this setup?

The sFlow option must be enabled and configured.

Both FlexNlCs must be connected to the same network.

The Compute Module profile must have exactly two connections defined.

An upgrade license must be purchased and deployed.

6. Your customer plans to manage an HPE BladeSystem enclosure with 16 blade servers and two HPE Virtual Connect modules installed. They also plan to use HPE OneView tomanage two HPE Primera arrays.

How many HPE OneView Advanced licenses will be required for this environment?

7. Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?

It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.

It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.

It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.

It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.

8. How will setting the Purpose field within the network definition of a server profile impact the network traffic?

network purpose can give higher priority for a specific type of traffic

network purpose will impact the traffic only if Virtual Connect modules are used

network purpose will define QoS within Logical Interconnect

network purpose does not affect the behavior of the network

9. To increase security, your customer wants to enable Secure Boot for HPE Synergy 480 Gen10 Compute Modules.

Which boot mode option should be configured in a server profile to enable required option?

EFI

UEFI optimized

UEFI

Legacy BIOS

10. Which firmware activation method is only available for a logical interconnect?

Force installation

Orchestration

Parallel

Manual orchestration

Page 2 of 3

11. For which HPE OneView resource can manual orchestration method be used when updating the firmware?

Logical enclosure

Server profile

Logical interconnect

Frame Link Module

12. Your customer asks you if it is possible to perform HPE Synergy initial setup remotely .

How should you respond?

Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.

Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.

HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.

HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.

13. Refer to the exhibit.

After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state .

How will this affect HPE OneView storage management capabilities?

Snapshot functionality will be limited only to the volumes not using these SANs.

Volume presentation through server profile will work with the discovered state.

Auto-zoning functionality will not work until SANs are associated with networks.

Volume provisioning will only work for arrays that ate accessible through these SANs.

14. Which locations are supported for HPE OneView remote scheduled backup? (Choose two.)

SCP

HTTPS

SFTP

HTTP

FTP

15. HOTSPOT

Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.

16. HOTSPOT

You need to make sure that server ports connected to this network cannot communicate with each other within the logical interconnect. Click the option within the network definition that will allow you to configure the required parameter.

17. Which statement about the presented storage pools is true?

Storage pools in discovered state can be removed from HPE OneView.

HPE OneView can be used to configure replication only between managed storage pools

All storage pools from the system named ThreePAR-1 can be used for volume provisioning

All storage pools in managed state have a valid HPE OneView license applied

18. You Just downloaded a logical enclosure support dump, but you cannot extract files from the downloaded support dump .

What is a likely cause of the issue?

The support dump for Logical Enclosure can be analyzed only using special tool.

The support dump is encrypted and cannot be unpacked

The support dump does not have a valid HPE OneView certificate

The backup user role must be used to extract the support dump

19. HOTSPOT

Click the option that will allow you to update the firmware of master and satellite modules.

20. Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS .

Which feature Is not available for this Compute Module?

BIOS management

Workload profile

Boot from SAN

Secure boot

Page 3 of 3

21. What step must be taken to add an HPE SuperDome Flex to an existing OneView environment

A Rack Management Controller must be added to HPE OneView.

HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.

Each HPE Superdome Flex chassis must be added Individually using BMC I

HPE Superdome Flex complex can be added by adding base chassis of this complex.

22. After replacing a failed Compute Module, you notice the server profile Is not automatically assigned to the replaced server hardware .

What can cause this issue?

IL0 firmware of the replacement server is different than firmware in broken server.

Server profile affinity is configured to Device Day + server hardware.

The enclosure group has to be updated to match the original enclosure group.

The replacement server has more memory or CPUs than broken machine.

23. What is the best practice when deploying an HPE OneView appliance?

Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.

deploy the appliance in a hypervisor cluster that Is not managed by OneView.

Use thin-provisioning for the HPE OneView appliance to save storage capacity.

Deploy two HPE OneView appliances and configure them in HA mode.

24. Your customer wants to manage their HPE Superdome Flex using HPE OneView.

Which component must be added to HPE OneView to accomplish this task?

Baseboard Management Controller (BMC)

Rack Management Controller (RMC)

all nPARs created within the complex

only the base chassis from the complex

25. Which action is allowed on storage pools managed by HPE OneView?

Volume provisioning

Setting storage pool replication

Changing storage pool RAID level

Changing storage pool capacity

26. Refer to the exhibit.

Which statement about the storage pools shown is true?

Volumes created on the first storage pool cannot use data reduction technologies

Both storage pools are in a managed state and can be used for volume provisioning

HPE OneView can be used to configure volume replication between these pools

Both storage pools have a license applied that enables management of these pools

27. Which statement about the volume template is true?

Users will be able to change sharing type and volume capacity

A volume created using this template will not support deduplication

A volume created using this template mil not support snapshots

Users will be able to select storage pool during volume creation

28. Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?

A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.

A logical JBOD cannot be created during server profile creation and must be prepared in advance

Different types of the drives can be used within a logical JBOD as long as they have the same capacity

Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator

29. Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.

How can this task be completed?

Set a specific workload profile within Logical Interconnect Group and update all servers.

Set a specific workload profile for all managed servers as an HPE OneView global setting.

Set a specific workload profile within server profile template and update all profiles.

Set a specific workload profile using IL0 interface for each individual server.

30. HOTSPOT

Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.

Facebook Twitter LinkedIn Google + Email