Microsoft MB-335 Free Dumps and Practice Exam

1. You need to configure the bicycles’ production resource.

Which option should you use?

2. DRAG DROP

A discrete manufacturer uses the time and attendance registration for production operations.

All employees register daily clock in and clock out times during a 40-hour. Monday through Friday workweek.

Pay periods are every two weeks. Workers are paid hourly.

The production manager will create work schedules with the following windows:

• Mandatory work hours

• Work hours during which employees can leave early without accruing absences

• Work hours during which employees can work extra time

If a junior production worker works over 90 hours in a pay period. the worker will receive lime and a half over 80 hours. If a senior production worker works over 90 hours in a pay period, the worker will receive double time over 80 hours.

Vou need to configure the system for these requirements.

Where should you configure this functionality? To answer, drag the appropriate forms to the correct requirements. Each form may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

3. HOTSPOT

A manufacturer uses Dynamics 365 Supply Chain Management to create bicycle parts as a configure-to-order configuration. All bicycle parts are sourced from external sources and assembled in the manufacturing facility.

The manufacturer plans to expand its capabilities to create custom bicycles parts in an engineer-to-order model. All bicycle parts will be created in the manufacturing facility. The custom bicycle parts must be omitted from any master planning process.

You need to describe the concepts for the requirements.

Which concepts should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

4. A company manufactures high performance bicycles.

The bicycles come in several different preconfigured models. Customers can also purchase custom configurations. Several add-ons are dependent on other accessories in order to be installed.

You need to set up the system to handle the different product configurations.

What should you do?

5. DRAG DROP

You need to create the new summer limited edition bicycle in Dynamics 365 in preparation for taking orders.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

6. HOTSPOT

You need to resolve the issue for UserG.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

7. Topic 4, Case Study 4, Fabrikam inc.



Fabrikam, Inc. Is a discrete manufacturer of outdoor patio furniture. The company originated as a sole owner working from a home garage, then moved into a commercial storage space, and later into a full manufacturing facility. The company operates as two operating legal entities, one in the United States and the other in Mexico.



As the company grew, the existing software systems failed to grow with it. This meant that financial reporting was managed in an outdated accounting system; raw materials planning, production, and inventory control were managed in another system; and cost calculations were tracked in multiple spreadsheets managed by analysts.



Current environment

The Fabrikam. inc. engineering team uses a third-party computer-aided design (CAD) system for drawings. These drawings are later introduced into one or more companies for sale. A customer service center handles complaint calls and places orders for distributors.



The current system landscape creates a lack of controls and visibility across the systems, leading to overages of some raw materials, shortages on others, and large quantities of scrap. Heavy production volume provides little to no room for system downtime. The staff manually creates production orders, which leads to double work for system entry later. This delay has a ripple effect into the materials planning.



The company currently sources teakwood from India, making it a more expensive and high-end material. Cedar and redwood are both sourced from the Western US. Truck driver shortages across the nation have caused shipping costs to rise sharply.

Fabrikam, Inc. recently decided to expand into the gas firepit market. All products are currently being prototyped. The company decides that the firepit prototype should be initially available only in the United States. The firepits will be manufactured only in Nevada and Arizona. The firepits are produced as prototyping: this production line operates only on Mondays.



Fabrikam, Inc. has purchased new manufacturing equipment for the firepit metal fabrication. This purchase includes a warranty, which requires that the company perform routine maintenance. Fabrikam, inc. elects to complete the maintenance in house on a quarterly schedule and maintain appropriate records for warranty purposes. The metal fabrication equipment consists of three separate machines used in a single production process.



Fabrikam. Inc. made the decision to move to Dynamics 365 Supply Chain Management.



Application and environment

• Fabrikam, inc. must move systems and processing to software as a service (SaaS) whenever possible because the company does not have enough IT staff to support hardware.



Inventory and costing

• Finished goods fall into three categories:

• Wood furniture (teak, cedar, redwood) o Outdoor heating (firepits. gas heaters)

• Each outdoor heating item with slight variations, such as a chrome or steel finish, must have a unique item number, o Repair parts (nuts and bolts, ignitors. and other parts)

• The system must account for the fact that Fabrikam. inc. must take legal ownership of teakwood at the time of shipment, not at the time of receipt into the warehouse.

• The company must accrue for the costs of the teakwood materials as soon as the company takes ownership. The company takes ownership at the time of shipment, which is posted prior to physical receipt at the warehouse.



Engineering

• Engineers who specialize in gas consumer goods will design the firepits and ate the only users with authority to release the products for sale.

• Engineering must notify customer service of any open orders that may contain a released product version that may be discontinued or delayed.

• The change request workflow must route to the engineer.



Production

• The raw material and subcomponent goods for the firepit must be managed by the engineer. This means the engineer must oversee any new items, material changes, address problems, and so on.

• The metal fabrication equipment must be tracked at the locations where the firepits are produced.

• The production team must operate on an all-day/everyday model, with each team operating in a 12-hour shift. This is a recent change to keep up with high demand for products, as well as for planning a new product line.

• Raw material and subcomponent items for the firepit prototype must not be available for use until engineering is ready for the prototype product release.

• Due to the production staff schedule, all equipment must be planned according to the staffing.

• Maintenance for each of the three pieces of machinery must be scheduled at the same time so that only the local maintenance technician works on the equipment.

• When the firepits are ready for the test market they must made be available for sale.

• The United States operating company must review any engineering products before they are available for sales or production orders,

• The engineering team must release the engineering product into the United States operating company,

• The engineering BOM lines must not be removed by the United States operating company. Application and environment

• The operations manager is concerned that system downtime is so frequent that It is impacting efficiency due to the all-day/everyday production operation model.



Inventory and costing

• Fabrikam, inc. marketing campaigns in the desert states of Arizona- Nevada, and New Mexico have led to an increased demand for teakwood furniture to endure weather elements. Supply and demand for this wood lowered expected margins with increased shipping costs and price increases from the vendors.

• User1 reports that the inventory value of the teakwood is not on the financial reports, even though ownership of the product begins at the port of shipment,

• Upon receipt into the physical warehouse, User2 reports that the warehouse workers received less teakwood than the ordered amount on the purchase order.



Engineering and production

• As the firepits are produced and feedback received from the test market, records must be maintained of each revision to the firepit design.

• Firepits must have attributes associated with them to specify the type of gas line that is available for the firepit such as natural gas or propane.

• Customer service is receiving calls that the firepit ignition switch does not always work as expected. This issue was reported through an engineering change request.

• User3 reports resource issues on the production shop floor due to system maintenance issues and other delays. The company does not want User3 or the other workers to stop production.

• User4 reports that a bolt needed for cedar wood furniture is out of stock. A temporary substitution bolt was identified prior to starting the production order.

• User5 reports that a hinge for redwood furniture will be discontinued at the end of the year. Production must reflect an updated part.

• A large order was placed for 1,500 pieces of teakwood furniture and production orders must start as soon as possible.

• Users reports the following:

• Only 100 pieces of furniture can be produced on the night shift due to resourcing. Enough raw materials are on hand to complete 100 pieces, but not enough to produce all 1.500 pieces.

• The production floor is organized into dedicated production lines, each with their own warehouse. The warehouse workers must pick the raw materials to the correct warehouse location.



HOTSPOT

You need to meet the needs for the large teakwood furniture order.

What must you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

8. You need to enable the features and configuration keys for the firepits.

Which two features should you enable? Each answer presents part of the solution. NOTE: Each correct selection is worth one point

9. You need to set up the configuration model to price the motorcycles correctly.

What should you do?

10. Topic.6 Mix QUES



A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use Products to adjust the concentration of active ingredients in the lotion. ProductC represents the remainder.

You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

11. A beverage company uses Dynamics 365 Supply Chain Management batch processing for production-

You need to identify the ingredient type used in batch processing when the base attribute of a product is added to a formula line.

What is the ingredient type?

12. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP 01 to represent the painting service.

You need to create a subcontracting activity for the painting service.

Solution:

• Create a vendor warehouse for the subcontracting vendor.

• Create a vendor resource and add it to a new work cell for outsource painting.

• Create a production flow transfer activity and specify the vendor warehouse as The target warehouse.

Does the solution meet the goal?

13. Topic 5, Adatum Corporation



Adatum Corporation is a multi-entity corporation located in Seattle, Washington in the United States. The company is a leading producer of specialty cakes and cookies. The company also manufactures specialty chocolates that use ethically sourced ingredients from around the world. The company plans to launch a new product line of organic chocolates later this year.



Adatum plans to implement Dynamics 365 Finance and Dynamics 365 Supply Chain Management to

manage financials, inventory, and manufacturing capabilities across the entire organization.

• Manufactured products are stored at the distribution warehouses until they are shipped to customers.

• Individually branded pre-packaged cake and cookie mixes are supplied to specialty cafes and restaurants. The mixes are shipped directly to the cafes and restaurants from the production factories.

• The company maintains a fleet of trucks and also subcontracts shipments between the factories and warehouses to outside vendors.

• The mixes and specialty chocolates are based on standard recipes that use precise ingredient ratios. There are strict rules around ingredient substitutions.

• All mixes use one of three base recipes as their foundation: BaseA, BaseB. and BaseC. Additional ingredients, spices, and flavorings are then added to make the final product.

• BaseA and BaseB are made in large batches and stored until they are used in the other mixes.

• Mixes with BaseA have a shelf life of six months due to the type of flour it uses.

• Specialty chocolates are manufactured only during the holiday season.

• Specialty desserts are offered during the holiday season. This year, customers may specify additional icing colors and cake layers when placing orders. Depending on the popularity of two of the new colors, they may be offered the next year.

• Cocoa oil that is extracted during the production of some of the specialty chocolates is used in the BaseB foundation mix.

• Cleaning and setup of machinery between products has been causing delays in production.

• Prices of raw ingredients such as sugar can fluctuate greatly depending on seasonal and worldwide demand.

• To properly record profitability, ail raw materials use the first in, first out (FIFO) costing method, while finished products are recorded at standard costs.

• Large fluctuations have been occurring at month end in costs reported due to the inability to track production runs that span from month-to-month.

• Leftover flour and sugar from production runs are collected, packaged, and donated to local food banks if the amount is too small to use in other runs.

• To maintain Adatum's certification as a manufacturer of ethically sourced ingredients, the

traceability of every ingredient in all products to their source must be tracked.

• All products must be randomly tested for adherence to quality standards for ingredient makeup and weight.

• Similar recipes must be able to be produced in succession to limit machinery cleaning and setup times.

• All costs must be tracked for each production run and be able to be reconciled at the end of the monthly accounting cycle, including any work in process (WIP) costs and donations.

• The organic chocolate line must be set up. The ingredients cannot be mixed with non-organic ingredients in inventory.

• Mixes are generally stored and sold in 16-ounce bags. Some quantities are sold and distributed in 5. 10. and 20-gallon containers to large restaurants.

• Each mix has a single unique item number and is tracked per batch produced.

• Specialty chocolate products must be stored in climate-controlled areas of the warehouse.

• QA TesterA discovers during a random test that the batch of a mix does not contain the necessary amount of IngredientB.

• VendorZ, who transports finished goods from PlantA to Warehouses, is consistently late picking up product.

• OperatorA must consolidate partial mix batch group runs into saleable package quantities.

• UserB must set up the mix items.

• UserC learns that mixes containing BaseA have been stamped with a batch date from the flour vendor and is not being calculated from the mix manufacturing date. The mixes from the past month that might be impacted need to be identified and the calculation needs to be corrected.

• UserD must update the costs of finished goods. Accounting wants labor calculated in WIP based on how much time an individual spends performing the operation, as well as the finished goods to post to a specific different ledger account.

• UserE must set up and maintain the cost of sugar.

• UserF must decrease downtime for the machinery.

• UserG must plan the specialty desserts for the current holiday season.



HOTSPOT

You need to resolve the issue for UserF.

What should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

14. You need to configure production operations for the pine and orange scent solutions.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

15. You use the master planning module for Dynamics 365 Supply Chain Management.

Planned production orders have been created.

Several sales orders are canceled in response to concerns about recent online reviews of a product.

You need to enable the appropriate action message.

Which action message should you enable?

16. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.

You need to create a subcontracting activity for the painting service.

Solution:

• Create a purchase agreement for the subcontracting vendor that contains the pricing information for SP-01.

• Create a vendor resource and a work cell for outsourced painting, then add the resource to the work cell.

• Create a production flow process activity using the painting work cell and the service item as the picking activity.

• Create a service term on the activity to tie the purchase agreement to the activity.

Does the solution meet the goal?

17. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen.

A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.

You need to create a subcontracting activity for the painting service.

Solution:

• Create a purchase agreement for the subcontracting vendor and add SP-01 as the painting service.

• Create a vendor resource then create a work cell for outsourced painting and add the resource to the work cell.

• Create a production flow process activity for the painting work cell and add the component to be painted as a picking activity.

• Create a server term to tie the purchase agreement to the activity.

Does the solution meet the goal?

18. You must ensure that the firepit product is available for sale.

How should the product be released?

19. You need to set up the correct production solution for the assembly are a.

Which solution should you implement?

20. You need to meet the requirements for User2.

What should you configure?

21. You need to set up the state control for sales of motorcycles.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

22. Topic 2, CASE STUDY 1 Manufacturing Company



General information

A manufacturing company produces custom configured-to-order motorcycles. The company plans to implement Dynamics 365 Supply Chain Management. The company contains one legal entity located in Missouri where all production and warehousing operations occur.



Customization options

The custom motorcycles have a variety of selections that can be selected in the listed order by the end customer, including the following:







Customization restrictions

The following restrictions on customizations are in place:

* Green color can only be sold with the Legend Trim.

* Orange color can be sold with the Sport or Legend Trim.

* The ML seat must be included in the Legend package.

* The MS seat must be included in the Sport package.



Manufacturing facilities

The company includes the following manufacturing groups: Assembly and Plastic Molding. The Assembly group is responsible for assembling the motorcycles with purchased and manufactured goods. The Plastic Molding group is responsible for manufacture of all plastic parts used in the assembly area.



Motorcycle manufacturing

The parts for the product assembly are picked from the warehouse and staged at the correct workstation by a warehouse operator for each production order.



Plastic manufacturing

Plastic parts are molded using dyes that create multiple parts at once. The parts are machined in the same production process to remove excess plastic and add additional holes for assembly. Excess plastic is recycled back into the feedstock of the same color plastic chips for use in the molding process.



Metal Parts

Raw metal parts are purchased fully machined but without primer or paint. The parts are subcontracted to a vendor for primer and paint based upon the color requirements.



Facility

The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.

Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.



Requirements

The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.

Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.



Sales Order

The company has the following requirements for sales orders:

* During the configuration of a sales order, invalid combinations must be prevented.

* Each configuration must create a unique bill of material (BOM) and Route based on options selected.

* Sales pricing for the sales order must be based upon options selected.

* Due to emissions regulations, the motorcycles cannot be sold to the state of California.



Motorcycle manufacturing

The company has the following requirements for motorcycle manufacturing:

* Schedule labor only at the labor pool level without machines by day

* Produce motorcycles within a scheduled day in any order.

* Record actual production labor with start/stop times.

* Record manager approval of labor entered prior to posting.

* Post actual material consumption after production is finished.



Plastic manufacture

The company has the following requirements for motorcycle manufacturing:

* Schedule both labor and machines.

* Adjust schedules by using a Gantt chart.

* Backflush standard labor by operation.

* Post actual material consumption at the start of production.

* Track and allocate costs to the excess plastic.

* Report multiple molded part numbers during the same production run.

* Determine the correct mold to use on a production order.

* Generate a batch number for each production order.



Metal Parts

The company has the following requirements for metal parts manufacturing:

* Schedule shipments to the vendor for painting.

* Receive painted parts into inventory from the vendor.

* Track vendor inventory levels.



Default

You must configure defaults for manufacturing execution production orders to meet the following requirements:

* Ensure accuracy for production order pick list posting.

* Ensure correct pick list creation.



Issues

A. In the current system, the company cannot calculate overhead rates and determine the breakdown of material, labor, machine, and overhead costs for production.

B. The company is manually calculating an 8% overhead on materials and posting a journal manually.



You need to create the constraint for the ML seat selection.

Which expression constraint should you use?

A. Implies[Trim==Legend,Seat==ML]

B. Seat!=ML

C. [Trim==Legend|Seat==ML]

D. Implies[Seat==ML,Trim==Legend]

23. A company produces paints and assembles bicycle frames.

You must account for paint drying time before assembly operations can begin.

You need to set up the operation to encompass queue times.

Which two options can you use? Each correct answer presents pad of the solution. NOTE: Each correct selection is worth one point.

24. A company uses Dynamics 365 Supply Chain Management.

The marketing group needs to be able to view a manufacturer's suggested retail price (MSRP) for a

new bill of materials (BOM) item when the cost of the BOM item is calculated. You need to configure the functionality.

What should you do?

25. HOTSPOT

A company makes engine parts used in the automotive industry.

They are in the process of retooling an existing manufacturing plant. They are looking to use Dynamics 365 for Finance and Operations to help support the Bill of Materials (BOM) product lifecycle for engineering version control.

You must translate existing production processes into the proper elements. You need to create BOM lifecycle states to translate existing production processes into the proper elements.

What type of BOM product lifecycle state should you create? To answer, select the appropriate BOM state in the answer area.