[March 10, 2025] Get Certified! D-VXR-OE-01 Dell VxRail Operate v2 Exam with Free Practice Test
Are you preparing for the D-VXR-OE-01 Dell VxRail Operate v2 certification exam? This exam is designed for IT professionals who manage, operate, and support Dell VxRail Hyperconverged Infrastructure (HCI) solutions. If you are looking to validate your skills in VxRail cluster administration, troubleshooting, and performance monitoring, this exam is a crucial step toward proving your expertise. In this blog post, we’ll share free sample questions to help you assess your knowledge.
Test Your Readiness With These Free D-VXR-OE-01 Practice Questions
1.What is the maximum number of racks supported when expanding a VxRail cluster beyond a single physical rack?
A. 2
B. 4
C. 6
D. 8
Answer: C
2.What is the correct order of steps to create a VM for a new project using vSAN and VxRail?
Answer:
3.How many Failures to Tolerate can be configured with vSAN RAID-1?
A. 0
B. 1 only
C. 1 or 2 only
D. 1, 2, or 3
Answer: D
4.A VxRail administrator wants to rename the VxRail cluster and the VxRail vSAN datastore.
What is the recommended method to make these changes?
A. Refer to the VMvvare vSphere and vSAN documentation Follow the steps detailed in the VMware documentation
B. Renaming the objects is not permitted Rebuild the cluster with the desired names
C. Use SolVe to generate the relevant procedures Follow the steps detailed in the procedures
D. Refer to the VxRail Appliance Administration Guide Follow the steps detailed in the guide
Answer: B
5.A VxRail administrator observes alarms that start with VXR in the vSphere client.
How can they obtain information about the alarms and the related knowledge base articles?
A. Go to the Alarm Definitions page and click the KB link.
B. Use the VxRail Event Code Reference.
C. Use the VxRail Administration Guide.
D. Consult the General VMware Knowledge Base.
Answer: B
6.VxRail Manager provides a software stack for a software-defined data center.
Which layers are part of the stack?
A. Storage, security, and management
B. Security, management, and network
C. Network, storage, and security
D. Management, network, and storage
Answer: D
7.What is the sequence of steps to deploy a second VDS for VxRail network traffic?
A. 1. Create port groups on the new VDS for the VxRail networks that must be migrated.
2. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports.
3. Cable VxRail NIC ports to ToR switches.
4. Configure the new VDS – Add hosts, assign physical adapters, and assign port groups to VMkernel adapters.
5. Create a VDS with the required number of uplinks.
B. 1. Configure the new VDS – Add hosts, assign physical adapters, and assign port groups to VMkernel adapters.
2. Create a VDS with the required number of uplinks.
3. Cable VxRail NIC ports to ToR switches.
4. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports.
5. Create port groups on the new VDS for the VxRail networks that must be migrated.
C. 1. Create a VDS with the required number of uplinks.
2. Configure the new VDS – Add hosts, assign physical adapters, and assign port groups to VMkernel adapters.
3. Cable VxRail NIC ports to ToR switches.
4. Create port groups on the new VDS for the VxRail networks that must be migrated.
5. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports.
D. 1. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports.
2. Configure the new VDS – Add hosts, assign physical adapters, and assign port groups to VMkernel adapters.
3. Create port groups on the new VDS for the VxRail networks that must be migrated.
4. Cable VxRail NIC ports to ToR switches.
5. Create a VDS with the required number of uplinks.
Answer: A
8.A VxRail administrator wants to determine how long the rebuild will take after experiencing a disk failure in the vSAN Cluster.
Where is this information located in the vSphere Client?
A. Configure > vSAN > Services > Object repair timer
B. Monitor > vSAN > Resyncing Objects
C. Monitor > vSAN > Data Migration Pre-Check
D. Configure > vSAN > Disk Management
Answer: B
9.What is the correct path for editing the Object Repair Time from the vCenter client?
A. Host > Monitor > vSAN > Services > Object Repair Timer (Repeat for each host)
B. Cluster > Monitor > vSAN > Services > Object Repair Timer
C. Cluster > Configure > vSAN > Services > Advanced Options > Edit
D. Host > Configure > vSAN > Services > Advanced Options > Edit (Repeat for each host)
Answer: C
10.Where in the VxRail Plugin can log bundles be generated?
A. Monitor > VxRail > Issues and alarms
B. Configure > VxRail >Troubleshooting
C. Monitor > VxRail > Security
D. Configure > VxRail > Support
Answer: B
11.A customer has a large storage capacity and low I/O performance requirements.
Which VxRail solution is the best fit?
A. E Series
B. P Series
C. S Series
D. V Series
Answer: C
12.What is true about Multitrack VxRail cluster expansion?
A. All VxRail networks are routable by default
B. VxRail nodes in the same cluster within a rack can be on different subnets
C. VxRail cluster can be expanded up to a maximum of 4 racks
D. VxRail System VMs run on the nodes in the first rack
Answer: D
13.An administrator wants to perform maintenance on a VxRail system.
Which configuration should be used for the VxRail Cluster Health Monitoring before starting the maintenance activity?
A. Maintenance mode
B. Disabled
C. Enabled
D. Suspended
Answer: B
14.Using VxRail Manager, what information can you find under the physical health view?
A. Model, Temperature, Memory, and Health State
B. Cluster ID, PSNT, Model, and Temperature
C. PSNT, Operational Status, Health State, and Memory
D. Cluster ID, Connected, Health State, and Operational Status
Answer: B
15.When configuring Data at Rest Encryption (DARE) on a vSAN cluster, what is required?
A. vSAN Standard
B. vSAN Advanced
C. External Key Management Server
D. Internal Key Management Server
Answer: C
16.What VxRail Manager activities can be performed by a user with the VMware Administrator role?
A. Build, Manage, Expand, and Shutdown Cluster only
B. Build, Manage, and Expand Cluster Manage HA, DRS, and vSAN settings
C. Build, Manage, and Expand Cluster only
D. Build, Manage, and Shutdown Cluster Manage vSAN settings
Answer: C
17.The vSphere Client is showing several failures on node 3. Support recommends opening an SSH session to troubleshoot. The connection fails to establish.
Which path should be used to enable SSH on the host from vSphere Client?
A. Host > Configure > VxRail > Enable SSH
B. Cluster > Configure > VxRail > Hosts > Enable SSH
C. Cluster > Monitor > System > Services
D. Host > Configure > System > Services
Answer: D
18.In a VxRail appliance, what does vSAN use in the form of flexible data containers to store and manage data?
A. Logical volumes
B. nodes
C. Datastores
D. Objects
Answer: D
19.What is used in the VxRail infrastructure to manage multiple clusters of ESXi servers?
A. Host client
B. vCenter
C. VxRail Manager
D. ESXi
Answer: B
20.As a VxRail administrator you have been asked to configure vSAN fault domains After selecting the VxRail cluster, where would you navigate to in vCenter to accomplish this task?
A. Configure > vSAN > Disk Management > Fault Domains & Stretched Cluster
B. Configure > vSAN > General > Fault Domains & Stretched Cluster
C. Configure > vSAN > Fault Domains & Stretched Cluster
D. Configure > vSAN > Configuration Assist > Fault Domains & Stretched Cluster
Answer: B
21.What is the VxRail API path for downloading the log bundle?
A. /v1/support/logs/(Log ID)
B. /v1/requests/(Request ID)
C. /v1/support/logs
D. /v1/support/logs/(Log ID)/download
Answer: D
22.What enables an administrator to download qualified software products for the VxRail System?
A. Secure Remote Services
B. MyVxRail
C. VxRail Market
D. vSphere Update Manager
Answer: C
23.VxRail Stretched cluster deployment with eight nodes at each data site is being proposed.
What is the latency requirement between each data site and the Witness site?
A. Less than 100 ms
B. Less than 200 ms
C. Less than 10 ms
D. Less than 5 ms
Answer: B
24.A VxRail deployment has eight nodes. The VxRail administrator does not find any compatible datastores when trying to create a storage policy with FTT=2 and FTM=Erasure Coding.
What is the likely reason?
A. Fault domains have not been configured yet
B. vSAN capacity reserve has been enabled
C. vSAN datastore used capacity is above 80%
D. Erasure coding is only supported on all-flash systems
Answer: D
25.What is the maximum number of nodes supported in a VxRail cluster with 1 GbE networking?
A. 12
B. 8
C. 4
D. 16
Answer: B
26.Which system components are managed through a vCenter plug-in?
A. RecoverPoint for Virtual Machines
vSphere
B. Secure Connect Gateway
vSphere
C. VxRail Manager
RecoverPoint for Virtual Machines
D. VxRail Manager
Secure Connect Gateway
Answer: C
27.An administrator is tasked with remediating the identified security vulnerabilities in the VxRail cluster. The administrator needs more information to resolve the security issues.
What should be used to gather the required information?
A. Advisories
B. Event Codes
C. Health Analyzer
D. Skyline Health
Answer: B
28.A failure occurs while upgrading a VxRail cluster.
Which log file should be analyzed?
A. loudmouth.log
B. platform_svc.log
C. marvin.log
D. lcm-web.log
Answer: D
29.A VxRail administrator wants to monitor vSAN Backend IOPS, Throughput, and Latency in the vSphere Web Client.
What must be turned on to monitor these metrics?
A. vSAN Health Service
B. vSAN Disk Management
C. vSAN Performance Service
D. vSphere Distributed Resource Scheduler
Answer: C
30.Which VxRail cluster can tolerate a host failure?
A. Number of Nodes: 4 Memory Utilization: 80%
B. Number of Nodes: 5 Memory Utilization: 82%
C. Number of Nodes: 3 Memory Utilization: 60%
D. Number of Nodes: 6 Memory Utilization: 85%
Answer: C
31.What is the minimum number of nodes needed for self-healing after a failure with a vSAN storage policy of FTT = 1 and FTM = Mirroring?
A. 3
B. 4
C. 5
D. 6
Answer: B
32.Which user interface provides remote power control (power on and power off) for VxRail E Series nodes?
A. VxRail Manager
B. IPM/BMC
C. iDRAC
D. VMware vSphere Web Client
Answer: C
33.A VxRail administrator is concerned that the NDC is a single point of failure on your VxRail nodes.
What can be done to increase redundancy in this scenario?
A. Spread network traffic across two ports on a PCIe adapter
B. Spread network traffic across other nodes in the cluster
C. Spread network traffic across NDC and PCIe adapter ports
D. Spread network traffic across two NDC
Answer: C
34.A company intends to deploy VxRail for their heavy database workloads on Oracle 11G.
Which type of VxRail nodes should be recommended?
A. E Series
B. S Series
C. P Series
D. V Series
Answer: C
35.A systems administrator is tasked with upgrading the VxRail software.
Which resource should the administrator use to plan the upgrade?
A. MyVxRail
B. ProSupport Services
C. SolVe Online
D. OpenManage Enterprise
Answer: C
36.When vSAN deduplication and compression are enabled on an existing VxRail cluster, when does the disk reformatting operation occur?
A. Immediately
B. Every 5 minutes
C. Every 60 minutes
D. As new data is written
Answer: A
37.In the vSphere Client, where is VxRail Health Monitoring enabled?
A. Cluster > Monitor > VxRail
B. Cluster > Configure > VxRail
C. Menu > Administration
D. Menu > VxRail
Answer: B
38.A VxRail cluster needs to be moved to a new rack in the datacenter. During this process, the entire cluster will be temporarily shut down.
Which Maintenance Mode option is the best fit?
A. Protected maintenance mode
B. Ensure accessibility
C. Full data migration
D. No data migration
Answer: A
39.Using the VxRail Plugin, what does VxRail administrator use to compare the current component version state against the expected component version state?
A. Compliance Reports
B. Skyline Reports
C. VxRail VxVerify
D. Health Monitoring
Answer: A
40.Which VxRail cluster can tolerate a host failure?
A. Number of Nodes: 3 Compute Utilization: 70%
B. Number of Nodes: 4 Compute Utilization: 80%
C. Number of Nodes: 6 Compute Utilization: 85%
D. Number of Nodes: 12 Compute Utilization: 85%
Answer: D
Get More D-VXR-OE-01 Exam Practice Questions
Want more D-VXR-OE-01 Dell VxRail Operate v2 practice questions? Download the latest and updated exam dumps to ensure you pass your exam with confidence. Click the link below to access the full version and start practicing today!
LEAVE A COMMENT