VCP-DCV 2023 2V0-21.23 Dumps - Boost Your Success Rate

VCP-DCV 2023 2V0-21.23 Dumps – Boost Your Success Rate

Jonnie Karnath2023-06-23T06:27:55+00:00

If you’re planning to take the VMware vSphere 8.x Professional exam, then you should consider using Certspots VCP-DCV 2023 2V0-21.23 Dumps to boost your success rate. These 2V0-21.23 exam dumps contain authentic questions and answers that are updated regularly to ensure that you’re getting the latest materials. With Certspots 2V0-21.23 exam dumps, you can practice as much as you want and get a feel for what the actual exam will be like. This will help you identify areas where you need to improve and give you the confidence to ace the exam.Don’t leave your success to chance. Use Certspots VCP-DCV 2023 2V0-21.23 exam dumps to prepare for your certification exam and increase your chances of success.

Page 1 of 3

1. fn administrator needs to provide encryption for workloads within an existing vSphere cluster.

The following requirements must be met:

• Workloads should be encrypted at rest.

• Encrypted workloads must automatically be encrypted during transit.

• Encryption should not require any specific hardware.

What should the administrator configure to meet these requirements?

Encrypted vSphere vMotion

Unified Extensible Firmware Interface (UEFI) Secure Boot

Host Encryption

VM Encryption

2. An administrator is responsible for the management of a VMware vCenter instance that is currently experience performance issues. The administrator quickly identifies that the CPU and memory utilization of vCenter is consistently over 90%. Upon further analysis, it seems that the vpxd process is contributing significantly to the performance issue.

A combination of which four steps should the administrator take to resolve the performance issues and ensure that a similar issue can be rectified without required downtime to vCenter moving forward? (Choose four.)

Gracefully shut down vCenter using the vSphere Client.

Enable CPU Hot add on the vCenter virtual machine.

Power on the vCenter Server Appliance using the vSphere Host Client.

Add a additional CPU and memory to the vCenter Server Appliance.

Enable CPU an Memory Hot add on the vCenter virtual machine.

Add a additional CPU and memory to the vCenter Server Appliance.

3. An administrator is deploying a new all flash vSAN cluster based on the vSAN Original Storage Architecture (OSA).

What is the minimum supported network throughput in Gb/s for each host?

4. During the staging of a patch on a vCenter Server Appliance, an error was encountered and the process stopped. An administrator resolved the root cause and is ready to continue with the staging of the patch.

From the vCenter Management Interface, which action should the administrator take to continue the process from the point at which the error occurred?

Use the Stage and Install option to resume the staging.

Use the Resume option to resume the staging.

Use the Unstage option to restart the staging.

Use the Stage Only option to restart the staging.

5. An administrator has Windows virtual machines (VMs) and VMware Tools is installed in each VM. The administrator performs a status check of VMware Tools using vSphere Lifecycle Manager.

What is the VMware Tools status for the Windows VMs if the version of VMware Tools has a known problem and must be immediately upgraded?

Version Unsupported

Guest Managed

Unknown

Upgrade Available

6. administrator successfully installs VMware ESXi onto the first host of a new vSphere duster but makes no additional configuration changes. When attempting to log into the vSphere Host Client using the Fully Qualified Domain Name (FQDN) of the host, the administrator receives the following error message:

‘’server Not Found Cwe can’t connect to the server at esxit101.corp.local.’’

• Host FQDN: esxi 101. Corp. local

• Management VLAN ID: 10

• DHCP: No

• Management IP Address: 172.16.10.101/24

• Management IP Gateway: 172.16.10.1

• Corporate DNS Servers: 172.16.10.5, 172.16.10.6

• DNS Domain: corp.local

Which three high level tasks should the administrator complete, at a minimum, in order to successfully log into the the vSphsrs Host Client using the FQDN for the exxi101 and complete the configuration (Choose three.)

Ensure a DNS A Record Is created for the VMware ESXI host on the corporate DNS servers,

Update the VMware ESXI Management Network DNS configuration to use the corporate DNS servers for name, resolution,

Update the VMware ESXI Management Network IPv4 configuration to use a static a IPv4 address.

Configure at least two network adapters for the VMware ESXI Management Network.

Set the value of the VMware ESXI Management Network VLAN ID to 10.

Disable IPv6 for the VMware ESXI Management Network.

7. Following a merger with another company, an administrator is tasked with configuring an identity source for VMware vCenter so that all vSphere administrators can authenticate using their existing Active Directory accounts. Each company has user accounts in their own Active Directory forests.

The following additional information has been provided:

• The corporate policy states that only Windows-based machine accounts are allowed in Active Directory.

Which action should the administrator take to configure vCenter Single Sign-On (SSO) to meet this requirement?

Configure SSO to use Active Directory over LDAP as the identity source.

Configure SSO to use OpenLDAP as the identity source.

Join the vCenter Server Appliance to the LDAP domain.

Configure SSO to use Active Directory (Integrated Windows Authentication) as the identity source.

8. An administrator is responsible for performing maintenance tasks on a vSphere cluster.

The cluster has the following configuration:

• Identically configured vSphere ESXi hosts (esx01, esx02, esx03 and esx04)

• All workloads are deployed into a single VMFS datastore provided by the external storage array

• vSphere High Availability (HA) has not been enabled

• vSphere Distributed Resource Scheduler (DRS) has not been enabled

Currently, a critical production application workload (VM1) is running on esx01.

Given this scenario, which two actions are required to ensure VM1 continues to run when esx01 is placed into maintenance mode? (Choose two.)

Fully automated DRS must be enabled on the cluster so that VM1 will be automatically migrated to another host within the cluster when esx01 is placed into maintenance mode.

VM1 must be manually shut down and cold migrated to another host within the cluster using vSphere vMotion before esx01 is placed into maintenance mode.

vSphere HA must be enabled on the cluster so that VM1 will be automatically migrated to another host within the cluster when esx01 is placed into maintenance mode.

VM1 must be manually live migrated to another host within the cluster using vSphere vMotion before esx01 is placed into maintenance mode.

VM1 must be manually migrated to another host within the cluster using vSphere Storage vMotion before esx01 is placed into maintenance mode.

9. An administrator is tasked with configuring an appropriate Single Sign-On (SSO) solution for VMware vCenter based on the following criteria:

• The solution should support the creation of Enhanced Link Mode groups.

• All user accounts are stored within a single Active Directory domain and the solution must support only this Active Directory domain as the identity source.

• All user account password and account lockout policies must be managed within the Active Directory domain.

• The solution should support token-based authentication.

Which SSO solution should the administrator choose based on the criteria?

vCenter Identity Provider Federation with Active Directory Federation Services as the identity provider

vCenter Single Sign-On with Active Directory over LDAP as the identity source

vCenter Single Sign-On with Active Directory (Windows Integrated Authentication) as the identity source

vCenter Identity Provider Federation with Active Directory over LDAP as the identity provider

10. An administrator is tasked with configuring remote direct memory access (RDMA) over Converged Ethernet v2 (RoCE v2).

Which two types of adapters must the administrator configure? (Choose two.)

Paravirtual RDMA adapter

RDMA network adapter

Software iSCSi adapter

Fibre Channel over Ethernet (FCoE) adapter

Software NVMe over RDMA storage adapter

Page 2 of 3

11. Refer to the exhibit.

After updating a predefined alarm on VMware vCenter, an administrator enables email notifications as shown in the attached alarm; however, notifications are NOT being sent.

Where must the mail server settings be configured by the administrator to resolve this issue?

In the ESXi host system config

In the alarm rule definitions

In the vCenter settings in the vSphere Client

in the vCenter Management Interface

12. An administrator enables Secure Boot on an ESXi host.

On booting the ESXi host, the following error message appears:

Fatal error: 39 (Secure Boot Failed)

The kernel has been tampered with.

The Trusted Platform Module chip has failed.

The administrator attempted to boot with a bootloader that is unsigned or has been tampered with.

A package (VIB or driver) has been tampered with.

13. An administrator is tasked with installing VMware vCenter.

The vCenter Server Appliance must support an environment of:

• 400 hosts

• 4000 virtual machines

Which two resources must be allocated, at a minimum, to meet the requirements? (Choose two.)

16 vCPUs

30 GB Memory

4 vCPUs

8 vCPUs

20 GB Memory

14. An administrator has a requirement to revert a running virtual machine to a previous snapshot after a failed attempt to upgrade an application.

When the administrator originally took the snapshot, the following choices in the Take Snapshot dialog were made:

• Snapshot the virtual machine's memory = false

• Quiesce guest file system = false

What will be the result of the administrator selecting the "Revert to Latest Snapshot" option to return the virtual machine to a previous snapshot?

The virtual machine will be restored to the parent snapshot in a powered on state.

The virtual machine will be restored to the parent snapshot in a powered off state.

The virtual machine will be restored to the child snapshot in a powered off state.

The virtual machine will be restored to the child snapshot in a powered on state.

15. A vSphere cluster has the following configuration:

• Virtual machines (VMs) are running Production and Test workloads

• vSphere Distributed Resource Scheduler (DRS) is enabled

• There are no resource pools in the cluster

Performance monitoring data shows that the Production workload VMs are not receiving their fully allocated memory when the vSphere cluster is fully utilized.

A combination of which two steps could the administrator perform to ensure that the Production VMs are always guaranteed the full allocation of memory? (Choose two.)

Assign a custom memory share value to the resource pool containing the Production VMs.

Assign a memory reservation value to the resource pool containing the Production VMs.

Create a parent resource pool for the Production VMs.

Create a sibling resource pool for each of the Production and Test VMs.

Create a child resource pool for the Test VMs.

16. An administrator wants to allow a DevOps engineer the ability to delete Tanzu Kubernetes Grid (TKG) cluster objects in a vSphere Namespace.

Which role would provide the minimum required permissions to perform this operation?

Administrator

Can View

Owner

Can Edit

17. An administrator plans to update the Supervisor cluster and has noticed some of the Tanzu Kubemetes Grid clusters are running an incompatible version.

Which action must the administrator take before proceeding with the Supervisor cluster update?

Update all Tanzu Kubernetes Grid clusters to the latest version prior to the Supervisor cluster update.

No action is needed - Tanzu Kubernetes Grid clusters will be updated automatically as part of the update process.

No action is needed - Incompatible Tanzu Kubernetes Grid clusters can be manually updated after the Supervisor cluster update.

Update incompatible Tanzu Kubernetes Grid clusters prior to the Supervisor cluster update.

18. After adding a new vSphere ESXi host with identical hardware configuration to an existing vSphere cluster, which task would an administrator complete prior to checking the compliance with an existing host profile?

Attach the host profile to the new host

Duplicate the host profile

Copy the host settings from the new host

Import the host profile

19. An administrator must gracefully restart a virtual machine (VM) through the vSphere Client but the option is greyed out. The administrator has full administrative access on VMware vCenter and all the objects available in vCenter, but has no access to log onto the operating system.

Which action should the administrator take to meet the objective?

Upgrade the virtual hardware

Migrate the VM to another host

Install VMware Tools

Restart vCenter

20. An administrator is adding a new ESXi host to an existing vSphere cluster. When selecting the cluster, the administrator Is unable to use the Cluster Quickstart workflow to add and configure the additional host.

What could be the root cause of this issue?

The administrator has previously dismissed the Cluster Quickstart workflow.

The administrator must manually add the host to the cluster before using the Cluster Quickstart workflow.

The administrator has not been assigned the required permissions to use the Cluster Quickstart workflow.

The administrator must enable the Cluster Quickstart workflow option in VMware vCenter.

Page 3 of 3

21. Which three features are only available when using vSphere Distributed Switches instead of vSphere Standard Switches? (Choose three.)

802.1Q tagging

Port mirroring

Netflow

Configuration backup and restore

IPv6 support

IPv4 support

Facebook Twitter LinkedIn Google + Email